HP Nc4000 Maintenance and Service Guide: HP Compaq Notebook nc4000 Series - Page 74
Removal and Replacement Procedures
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
5 Removal and Replacement Procedures This chapter provides removal and replacement procedures. Torx and Phillips screws are removed during disassembly. There are 55 screws, alignment pins, and standoffs, in 13 different sizes, that must be removed, replaced, and/or loosened when servicing the notebook. Make special note of each screw size and location during removal and replacement. Refer to Appendix C, "Screw Listing," for detailed information on screw sizes, locations, and usage. Maintenance and Service Guide 5-1
Maintenance and Service Guide
5–1
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Torx and Phillips screws are removed during disassembly. There
are 55 screws, alignment pins, and standoffs, in 13 different sizes,
that must be removed, replaced, and/or loosened when servicing
the notebook. Make special note of each screw size and location
during removal and replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.