HP OMEN 15-ce100 Maintenance and Service Guide - Page 48

WLAN module, Remove the Phillips PM2.0×3.4 screw

Get HP OMEN 15-ce100 PDF manuals and user guides View all HP OMEN 15-ce100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

WLAN module Description Realtek RTL8822BE 802.11 AC 2×2 WiFi + BT 4.2 Combo Adapter Intel Dual Band Wireless-AC 9560 802.11 AC 2×2 WiFi + BT 5 Combo Adapter Spare part number 915623-001 L22634-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the WLAN module, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". 2. Remove the Phillips PM2.0×3.4 screw (2) that secures the WLAN module to the system board (the WLAN module tilts up). 3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. 38 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
WLAN module
Description
Spare part number
Realtek RTL8822BE 802.11 AC 2×2 WiFi + BT 4.2 Combo Adapter
915623-001
Intel Dual Band Wireless-AC 9560 802.11 AC 2×2 WiFi + BT 5 Combo Adapter
L22634-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement
Before removing the WLAN module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
36
).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled “1” connects to the WLAN module “Main” terminal labeled “1”.
The WLAN antenna cable labeled “2” connects to the WLAN module “Aux” terminal labeled “2”.
2.
Remove the Phillips PM2.0×3.4 screw
(2)
that secures the WLAN module to the system board (the WLAN
module tilts up).
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
38
Chapter 6
Removal and replacement procedures for authorized service provider parts