HP OMEN 15-ce100 Maintenance and Service Guide - Page 59
Fans, System support brackets see
![]() |
View all HP OMEN 15-ce100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Fans NOTE: The left and right fans are spared in a single kit. Description Fan kit Spare part number L22261-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the fans, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36), and then remove the following components: a. Solid state drive (see Solid state drive on page 33). b. Hinge covers (see Hinge covers on page 45). c. System support brackets (see System support brackets on page 46). Remove the fans: 1. Disconnect the fan cables from the system board (1). 2. Remove the fan cables from the routing path clips (2). 3. Remove the two Phillips PM2.0×5.7 screws (3) securing the fans to the computer. Component replacement procedures 49
![](/manual_guide/products/hewlettpackard-omen-15ce000-maintenance-service-guide-6d555dd/59.png)