HP OMEN 15-ce100 Maintenance and Service Guide - Page 61
USB board, Remove the Phillips PM2.0×5.7 screw
![]() |
View all HP OMEN 15-ce100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
USB board NOTE: The USB board spare part kit does not include the connector cable. Description USB board (for use only on computer models equipped with an Nvidia N17E GPU) USB board (for use only on computer models equipped with an Nvidia N17P GPU) USB board connector cable Spare part number L17321-001 L17322-001 929447-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the USB board, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36), and then remove the following components: a. Hinge covers (see Hinge covers on page 45). b. System support brackets (see System support brackets on page 46). c. Fans (see Fans on page 49). Remove the USB board: 1. Disconnect the USB board connector cable from the USB board (1). 2. Remove the Phillips PM2.0×5.7 screw (2). Component replacement procedures 51
![](/manual_guide/products/hewlettpackard-omen-15ce000-maintenance-service-guide-6d555dd/61.png)