HP Officejet 9100 HP Officejet 9100 - User Guide - Page 116
Resetting the HPJetdirect print server, Upgrading the firmware in the all-in-one
View all HP Officejet 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
z HP Web Jetadmin software Open the HP Web Jetadmin software. See the software documentation for information about alerts and notifications. Note Resetting the HP Jetdirect print server Resetting the HP Jetdirect print server restores the factory default values of the HP Jetdirect print server. When you restore the factory default values for the HP Jetdirect print server, all previously stored EIO settings are lost. To reset the HP Jetdirect print server 1 Press (POWER) to turn off the all-in-one. 2 While holding down the (down), -, and BLACK/COLOR buttons on the control panel, press (POWER) to turn on the all-in-one. CAUTION Upgrading the firmware in the all-in-one From time to time, Hewlett-Packard provides firmware upgrades for products. These upgrades provide additional or improved functionality. When a firmware upgrade for the all-in-one is available, a notification message appears on the HP Instant Support homepage. You can open the download site from the homepage. You can also obtain information about available upgrades at http://www.hp.com/support/officejet9100. Use the methods in the following sections to upgrade the firmware. See the readme file associated with the firmware upgrade for details. You do not need to keep a firmware upgrade file after you have performed the upgrade. Do not cancel the firmware upgrade after you have started it. Canceling the process can damage the firmware in the all-in-one. To upgrade the firmware by using the firmware download utility (FDU) 1 Download the firmware upgrade file from the HP website and store it on the hard disk of your computer. 2 Browse to the location of the firmware upgrade file and open the file. 114 9 - Managing the administrator functions ENWW