HP OmniBook xe3-gc HP OmniBook XE3 - Setup Guide - Page 17
To turn on the computer
View all HP OmniBook xe3-gc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Introducing Your Computer Setting Up the Computer 1. Plug one end of the phone line into the modem phone jack on the computer. Be sure it clicks into place. CAUTION 2. Plug the other end of the phone line into a telephone jack. (If the phone line does not fit your telephone jack, you may need to use an adapter.) Your built-in modem may not work with multiple phone lines or a private branch exchange (PBX), cannot be connected to a coin-operated telephone, and does not work with party lines. Some of these connections may result in excess electrical voltage and could cause a malfunction in the internal modem. Check your telephone line type prior to connecting your phone line. To turn on the computer Slide the power switch to the left-it's the control above the left side of the keyboard. Windows starts automatically. If you are turning on the computer for the first time, go to "To set up Windows" on page 18. The power status light next to the power switch (see "Status lights" on page 14) reports the following: • steady green light: computer is on • steady amber light: computer is in system standby (or suspend) mode • no light: computer is off or in hibernate mode See "Managing Power Consumption" on page 28 for additional information about turning off your computer. Startup Guide 17