HP P1006 Service Guide - Page 33

Change the printer separation pad, Unplug the device from the wall outlet. - roller set

Get HP P1006 - LaserJet B/W Laser Printer PDF manuals and user guides
UPC - 883585164479
View all HP P1006 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Change the printer separation pad Normal use with good media causes wear. The use of poor media might require more frequent replacement of the separation pad. If the device regularly pulls multiple sheets of media at a time, you might need to change the separation pad. NOTE: Before you change the separation pad, clean the pickup roller. See Clean the pickup roller on page 20. WARNING! Before changing the printer separation pad, turn the device off by unplugging the power cord, and wait for the device to cool. 1. Unplug the device from the wall outlet. 2. Remove paper and close main input tray. Set device on its front. 3. At the bottom of the device, unscrew the two screws holding the separation pad in place. ENWW Change the printer separation pad 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
Change the printer separation pad
Normal use with good media causes wear. The use of poor media might require more frequent
replacement of the separation pad.
If the device regularly pulls multiple sheets of media at a time, you might need to change the separation
pad.
NOTE:
Before you change the separation pad, clean the pickup roller. See
Clean the pickup roller
on page
20
.
WARNING!
Before changing the printer separation pad, turn the device off by unplugging the power
cord, and wait for the device to cool.
1.
Unplug the device from the wall outlet.
2.
Remove paper and close main input tray. Set device on its front.
3.
At the bottom of the device, unscrew the two screws holding the separation pad in place.
ENWW
Change the printer separation pad
21