HP Pavilion 13-s000 Maintenance and Service Guide - Page 38

Connector board

Get HP Pavilion 13-s000 PDF manuals and user guides View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

4. If it is necessary to replace the hard drive connector adapter, slide the adapter (1) off of the front end of the hard drive. 5. If it is necessary to replace the hard drive bracket, release the sides of the bracket from the hard drive, and then lift the bracket straight up (2) and remove the bracket from the hard drive. The hard drive bracket and hard drive connector adapter are included in the Hard Drive Hardware Kit, spare part number 808238-001 Reverse this procedure to reassemble and install the hard drive. Connector board Description Connector board (includes cable, SD card slot, USB port, and double-sided adhesive) Spare part number 809831-001 Before removing the connector board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 27). Remove the connector board: 30 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
4.
If it is necessary to replace the hard drive connector adapter, slide the adapter
(1)
off of the front end of
the hard drive.
5.
If it is necessary to replace the hard drive bracket, release the sides of the bracket from the hard drive,
and then lift the bracket straight up
(2)
and remove the bracket from the hard drive.
The hard drive bracket and hard drive connector adapter are included in the Hard Drive Hardware Kit,
spare part number 808238-001
Reverse this procedure to reassemble and install the hard drive.
Connector board
Description
Spare part number
Connector board (includes cable, SD card slot, USB port, and double-sided adhesive)
809831-001
Before removing the connector board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
27
).
Remove the connector board:
30
Chapter 5
Removal and replacement procedures