HP Pavilion 13-s000 Maintenance and Service Guide - Page 46

Memory module

Get HP Pavilion 13-s000 PDF manuals and user guides View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste is used on the processor (1) and the fan/heat sink assembly section (2) that services it. Reverse this procedure to install the fan/heat sink assembly. Memory module Description 8-GB (PCL3, 12800, 1600) 4-GB (PCL3, 12800, 1600) 2-GB (PCL3, 12800, 1600) Spare part number 693374-005 691740-005 691739-005 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 27). 6. Remove the WLAN module (see WLAN module on page 31). 7. Remove the system board (see System board on page 33). Remove the memory module: 1. Turn the system board upside down with the front toward you. 38 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly
and the system board each time the fan/heat sink assembly is removed. Thermal paste is used on
the processor
(1)
and the fan/heat sink assembly section
(2)
that services it.
Reverse this procedure to install the fan/heat sink assembly.
Memory module
Description
Spare part number
8-GB (PCL3, 12800, 1600)
693374-005
4-GB (PCL3, 12800, 1600)
691740-005
2-GB (PCL3, 12800, 1600)
691739-005
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
27
).
6.
Remove the WLAN module (see
WLAN module
on page
31
).
7.
Remove the system board (see
System board
on page
33
).
Remove the memory module:
1.
Turn the system board upside down with the front toward you.
38
Chapter 5
Removal and replacement procedures