HP Pavilion 13-s000 Maintenance and Service Guide - Page 56
Power button board
View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
f. Remove the webcam/microphone module cable (3). The webcam/microphone module cable is available using spare part number 809823-001. Reverse this procedure to reassemble and install the display assembly. Power button board Description Power button board (includes cable) Spare part number 809830-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 27). 6. Remove the WLAN module (see WLAN module on page 31). 7. Remove the system board (see System board on page 33). 8. Remove the display assembly (see Display assembly on page 41). Remove the power button board: 1. Remove the Phillips PM2.0×4.1 screw (1) that secures the power button board to the base enclosure. 2. Slide the power button board (2) forward until it is clear of the base enclosure. 48 Chapter 5 Removal and replacement procedures