HP Pavilion 13-s000 Maintenance and Service Guide - Page 39
WLAN module
View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
1. Release the ZIF connector (1) to which the connector board cable is attached, and then disconnect the connector board cable from the system board. 2. Detach the connector board cable (2) from the battery. (The connector board cable is attached to the battery with double-sided adhesive.) 3. Remove the Philllips PM2.5×4.4 screw (3) that secures the connector board to the base enclosure. 4. Remove the connector board (4). Reverse this procedure to install the connector board. WLAN module Description Spare part number Intel Dual Band Wireless-AC 3160 802.11 ac 1×1 WiFi + Bluetooth 4.0 Combo Adapter 784644-005 Intel 3165NGWG 1 ac 1×1 + Bluetooth 4.0 LE PCIe+USB NGFF 2230 Worldwide Combo Adapter 806723-005 Realtek RTL8723BE 802.11b/g/n 1×1 Wi-Fi + Bluetooth 4.0 Combo Adapter for use in all countries and 792610-005 regions except Brazil Realtek RTL8723BE 802.11b/g/n 1×1 Wi-Fi + Bluetooth 4.0 Combo Adapter for use only in Brazil 792610-205 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. WLAN module 31