HP Pavilion 13-s000 Maintenance and Service Guide - Page 48

Speakers

Get HP Pavilion 13-s000 PDF manuals and user guides View all HP Pavilion 13-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 809838-001 Before removing the speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 27). 6. Remove the WLAN module (see WLAN module on page 31). 7. Remove the system board (see System board on page 33). Remove the speakers: 1. Release the speaker cables from the retention clips (1) built into the base enclosure. 2. Remove the three Phillips PM2.0×5.8 shoulder screws (2) that secure the speakers to the base enclosure. 3. Remove the speakers (3). NOTE: When removing the speakers, make note of the location of the six rubber isolators (4). Removal of or damage to these isolators can cause degradation to speaker performance. Reverse this procedure to install the speakers. 40 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
809838-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
27
).
6.
Remove the WLAN module (see
WLAN module
on page
31
).
7.
Remove the system board (see
System board
on page
33
).
Remove the speakers:
1.
Release the speaker cables from the retention clips
(1)
built into the base enclosure.
2.
Remove the three Phillips PM2.0×5.8 shoulder screws
(2)
that secure the speakers to
the base enclosure.
3.
Remove the speakers
(3)
.
NOTE:
When removing the speakers, make note of the location of the six rubber isolators
(4)
.
Removal of or damage to these isolators can cause degradation to speaker performance.
Reverse this procedure to install the speakers.
40
Chapter 5
Removal and replacement procedures