HP Pavilion 14-al000 Maintenance and Service Guide - Page 43
TouchPad, Remove the three Phillips PM2.0×4.0 screws
View all HP Pavilion 14-al000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. If it is necessary to replace the hard drive cable, slide the cable (2) off of the front end of the hard drive. Reverse this procedure to reassemble and install the hard drive. TouchPad NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available using spare part number 856203-001. Description TouchPad (includes bracket) Spare part number 856209-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the TouchPad: 1. Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the TouchPad board. 2. Remove the three Phillips PM2.0×4.0 screws (2) that secure the TouchPad and TouchPad bracket to the keyboard/top cover. 3. Remove the three Phillips PM2.0×2.2 broad head screws (3) that secure the TouchPad to the keyboard/ top cover. 4. Remove the TouchPad bracket (4). Component replacement procedures 35