HP Pavilion 14-al000 Maintenance and Service Guide - Page 59
Speakers, Reverse this procedure to install the TouchPad cable.
View all HP Pavilion 14-al000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Reverse this procedure to install the TouchPad cable. Speakers Description Speakers (includes cables) Spare part number 856220-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31), and then remove the following components: a. Battery (see Battery on page 33) b. WLAN module (see WLAN module on page 37) c. Solid-state drive (see Solid-state drive on page 42) d. Fan (see Fan on page 43) e. System board (see System board on page 44) Remove the speakers: 1. Release the display panel cable from the routing channel (1) built into the left speaker. 2. Release the wireless antenna cables from the routing channel (2) built into the right speaker. Component replacement procedures 51