HP Pavilion 14-al000 Maintenance and Service Guide - Page 44
Memory module, Disconnect the battery cable from the system board see
View all HP Pavilion 14-al000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5. Remove the TouchPad (5). Reverse this procedure to install the TouchPad. Memory module Description 8-GB (2133, 1.2-V, DDR4) 4-GB (2133, 1.2-V, DDR4) 2-GB (2133, 1.2-V, DDR4) Spare part number 820570-005 820569-005 851379-005 Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Disconnect the battery cable from the system board (see Battery on page 33). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 36 Chapter 5 Removal and replacement procedures