HP Pavilion 14-al000 Maintenance and Service Guide - Page 47

RTC battery, from the system board.

Get HP Pavilion 14-al000 PDF manuals and user guides View all HP Pavilion 14-al000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 857380-001 Before removing the card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the keyboard/top cover. (The RTC battery is attached to the keyboard/ top cover with double-sided adhesive.) 3. Remove the RTC battery. Reverse this procedure to install the RTC battery. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided adhesive)
857380-001
Before removing the card reader board, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
).
5.
Remove the battery (see
Battery
on page
33
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Detach the RTC battery
(2)
from the keyboard/top cover. (The RTC battery is attached to the keyboard/
top cover with double-sided adhesive.)
3.
Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Component replacement procedures
39