HP Pavilion 14-al000 Maintenance and Service Guide - Page 55

Heat sink, and then remove the following components

Get HP Pavilion 14-al000 PDF manuals and user guides View all HP Pavilion 14-al000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

5. Remove the system board (3). Reverse this procedure to install the system board. Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description For use only on computer models equipped with a graphics subsystem with discrete memory For use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 855840-001 855841-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31), and then remove the following components: a. Battery (see Battery on page 33) b. WLAN module (see WLAN module on page 37) c. Solid-state drive (see Solid-state drive on page 42) d. Fan (see Fan on page 43) e. System board (see System board on page 44) Remove the heat sink: Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
5.
Remove the system board
(3)
.
Reverse this procedure to install the system board.
Heat sink
NOTE:
The heat sink spare part kit includes replacement thermal material.
Description
Spare part number
For use only on computer models equipped with a graphics subsystem with discrete memory
855840-001
For use only on computer models equipped with a graphics subsystem with UMA memory
855841-001
Before removing the heat sink, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
), and then remove the following components:
a.
Battery (see
Battery
on page
33
)
b.
WLAN module (see
WLAN module
on page
37
)
c.
Solid-state drive (see
Solid-state drive
on page
42
)
d.
Fan (see
Fan
on page
43
)
e.
System board (see
System board
on page
44
)
Remove the heat sink:
Component replacement procedures
47