HP Pavilion 15-bc200 Maintenance and Service Guide - Page 49
Hard drive, and then lift the hard drive
View all HP Pavilion 15-bc200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Hard drive Table 5-3 Hard drive, bracket, and cable descriptions and part numbers Description Hard drive, 1 TB, 5400 rpm, 2.5 inch Hard drive, 1 TB, 5400 rpm, 7.0 mm Hard drive, 2 TB, 5400 rpm, 7.0 mm Hard drive bracket Hard drive cable Spare part number 778192-005 L30422-005 912487-855 913937-001 858969-001 Before removing the hard drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 36). 2. Remove the base enclosure (see Base enclosure on page 36). 3. Disconnect the cable from the battery (see Battery on page 38). Remove the hard drive: 1. Open the ZIF connector latch on the system board (1), and then disconnect the hard drive cable (2). 2. Loosen the side brackets (3), lift the front of the hard drive upward (4), and then lift the hard drive from the computer (5). Reverse this procedure to install the hard drive. If it is necessary to disassemble the hard drive, follow these steps: ▲ Remove the hard drive connector (1), and then remove the side brackets (2). Component replacement procedures 41