HP Pavilion 15-bc200 Maintenance and Service Guide - Page 64
Touchpad cable ZIF, Display cable ZIF
View all HP Pavilion 15-bc200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3. Disconnect the cable from the battery (see Battery on page 38). 4. Remove the fans (see Fan assembly on page 54). 5. Remove the solid-state drive (see Solid-state drive (M.2) on page 43). When replacing the system board, be sure to remove the following components (as applicable) from the defective system board and install on the replacement system board: ● Memory modules (see Memory module on page 44). ● WLAN module (see WLAN module on page 46). ● Heat sink (see Heat sink on page 47). ● PCH heat sink (see PCH heat sink on page 49). Remove the system board: 1. Disconnect the following cables: ● Wireless antenna cable (1) ● Speaker cable (2) ● Keyboard cable (ZIF) (3) ● Display cable (ZIF) (4) ● USB board cable (ZIF) (5) ● Touchpad cable (ZIF) (6) ● Keyboard backlight cable (ZIF) (7) 56 Chapter 5 Removal and replacement procedures for authorized service provider parts