HP Pavilion 15-bc200 Maintenance and Service Guide - Page 70

L02666-001: DM USB 2.0, HD, Mjpeg, VDHC, TL used in all models

Get HP Pavilion 15-bc200 PDF manuals and user guides View all HP Pavilion 15-bc200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

7. Using a non-marking, non-conductive pry tool, starting on the top edge (1), loosen the display bezel, disconnecting the plastic clips to release the edge of the bezel. Continue on the left and right edges (2) and then bottom edge (3), and then lift the display bezel (4) to remove it. Display bezels are available as spare part number 856725-001 for non-touch panels and 856726-001 for touch panels. 8. If it is necessary to remove the camera, use a tool and lift the camera module to disengage the adhesive that secures it to the enclosure (1), and then disconnect the cable (2) from the module. IMPORTANT: The camera module is fragile. Use care not to damage it during removal. Camera are available using the following spare part numbers: L02666-001: DM USB 2.0, HD, Mjpeg, VDHC, TL (used in all models) 62 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
7.
Using a non-marking, non-conductive pry tool, starting on the top edge
(1)
, loosen the display bezel,
disconnecting the plastic clips to release the edge of the bezel. Continue on the left and right edges
(2)
and then bottom edge
(3)
, and then lift the display bezel
(4)
to remove it.
Display bezels are available as spare part number 856725-001 for non-touch panels and 856726-001
for touch panels.
8.
If it is necessary to remove the camera, use a tool and lift the camera module to disengage the adhesive
that secures it to the enclosure
(1)
, and then disconnect the cable
(2)
from the module.
IMPORTANT:
The camera module is fragile. Use care not to damage it during removal.
Camera are available using the following spare part numbers:
L02666-001: DM USB 2.0, HD, Mjpeg, VDHC, TL (used in all models)
62
Chapter 5
Removal and replacement procedures for authorized service provider parts