HP Pavilion 15-bc200 Maintenance and Service Guide - Page 66

RTC battery, Remove the RTC battery

Get HP Pavilion 15-bc200 PDF manuals and user guides View all HP Pavilion 15-bc200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

RTC battery Table 5-13 RTC battery description and part number Description RTC battery Spare part number 741976-001 Before removing the RTC battery, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 36). 2. Remove the base enclosure (see Base enclosure on page 36) 3. Disconnect the cable from the battery (see Battery on page 38), and then remove the following components: a. Solid-state drive (see Solid-state drive (M.2) on page 43). b. Fans (see Fan assembly on page 54). c. System board (see System board on page 55). Remove the RTC battery: 1. Position the removed system board upside down. 2. Use a non-conductive tool to pry the battery from the socket (1), and then remove the battery from the system board socket (2). Reverse this procedure to install the RTC battery. 58 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
RTC battery
Table 5-13
RTC battery description and part number
Description
Spare part number
RTC battery
741976-001
Before removing the RTC battery, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
36
).
2.
Remove the base enclosure (see
Base enclosure
on page
36
)
3.
Disconnect the cable from the battery (see
Battery
on page
38
), and then remove the following
components:
a.
Solid-state drive (see
Solid-state drive (M.2)
on page
43
).
b.
Fans (see
Fan assembly
on page
54
).
c.
System board (see
System board
on page
55
).
Remove the RTC battery:
1.
Position the removed system board upside down.
2.
Use a non-conductive tool to pry the battery from the socket
(1)
, and then remove the battery from the
system board socket
(2)
.
Reverse this procedure to install the RTC battery.
58
Chapter 5
Removal and replacement procedures for authorized service provider parts