HP Pavilion PC 14-dv1000 Maintenance and Service Guide - Page 51

Speakers, USB/audio board, Remove the Phillips M2.0 × 3.0 screw from each speaker

Get HP Pavilion PC 14-dv1000 PDF manuals and user guides View all HP Pavilion PC 14-dv1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Speakers To remove the speakers, use this procedure and illustration. Table 5-7 Speaker description and part number Description Speaker Kit Spare part number M16640-001 Before removing the speakers, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 32). 2. Remove the bottom cover (Bottom cover on page 32). 3. Remove the battery (see Battery on page 34). 4. Remove the solid-state drive (see Solid-state drive on page 38). Remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Remove the Phillips M2.0 × 3.0 screw from each speaker (2). 3. Remove the speakers from the computer (3). Reverse this procedure to install the speakers. USB/audio board To remove the USB/audio board, use this procedure and illustration. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-7
Speaker description and part number
Description
Spare part number
Speaker Kit
M16640-001
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
32
).
2.
Remove the bottom cover (
Bottom cover
on page
32
).
3.
Remove the battery (see
Battery
on page
34
).
4.
Remove the solid-state drive (see
Solid-state drive
on page
38
).
Remove the speakers:
1.
Disconnect the speaker cable from the system board
(1)
.
2.
Remove the Phillips M2.0 × 3.0 screw from each speaker
(2)
.
3.
Remove the speakers from the computer
(3)
.
Reverse this procedure to install the speakers.
USB/audio board
To remove the USB/audio board, use this procedure and illustration.
Component replacement procedures
43