HP Pavilion xu100 HP OmniBook 500 - Startup Guide Revision 3 - Page 49
Installing Additional RAM
View all HP Pavilion xu100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Add-On Devices Installing Additional RAM Installing Additional RAM Your computer has no memory (RAM) built in, but has two slots for RAM modules: the system RAM slot beneath the keyboard (which contains a module installed at the factory), and an expansion slot on the bottom of the unit. You can use both of these slots to expand your unit's RAM. Use HP PC-100 or higher SDRAM only. You'll need a small Phillips screwdriver for these procedures. CAUTION To install a RAM expansion module To increase your computer's RAM, you can install a RAM module in the expansion slot on the bottom of the computer. Your computer's chips are extremely sensitive to static electricity, and can be permanently damaged by it. Handle the RAM module only by its edges. Before installing the memory module, discharge your body's static electricity by touching the metal shielding around the connectors on the rear of the computer. 1. Click Start, Shut Down, Shut down (Windows 98 or 2000) or Start, Turn Off Computer, Turn Off (Windows XP). 2. Important: unplug the AC adapter, if present, and remove the battery. 3. From the bottom of the computer, remove the screw holding the RAM cover, and remove the cover. Startup Guide 49