HP Photosmart C6200 Basics Guide - Page 15
To load full-size paper, Use the HP All-in-One features
View all HP Photosmart C6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
To load full-size paper 1. Pull out the main input tray, and then slide the paper-width and paper-length guides to their outermost positions. 2. Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: • Make sure it is free of rips, dust, wrinkles, and curled or bent edges. • Make sure all the paper in the stack is the same size and type. 3. Insert the stack of paper into the main input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops. TIP: If you are using letterhead, insert the top of the page first with the print side down. For more help on loading full-size paper and letterhead, refer to the diagram engraved in the base of the input tray. 4. Slide the paper-width and paper-length guides inward until they stop at the edges of the paper. Do not overload the main input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width guide. Use the HP All-in-One features Load originals and load paper 13