HP ProBook 6465b HP ProBook 6465b Notebook PC - Maintenance and Service Guide - Page 101

ExpressCard assembly

Get HP ProBook 6465b PDF manuals and user guides View all HP ProBook 6465b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

2. Press in on the smart card reader (1), and then lift the reader slightly upward (2) while pulling it out of the slot (3). Reverse this procedure to install the smart card reader assembly. ExpressCard assembly Description ExpressCard assembly Spare part number 642763-001 Before removing the ExpressCard assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Remove the bottom door (see Bottom door on page 48). b. Hard drive (see Hard drive on page 53) c. Optical drive (see Optical drive on page 49) d. Fan (see Fan on page 63) e. Heat sink (see Heat sink on page 64) f. Modem module (see Modem module on page 62) Component replacement procedures 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
2.
Press in on the smart card reader
(1)
, and then lift the reader slightly upward
(2)
while pulling it
out of the slot
(3)
.
Reverse this procedure to install the smart card reader assembly.
ExpressCard assembly
Description
Spare part number
ExpressCard assembly
642763-001
Before removing the ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
41
).
5.
Remove the following components:
a.
Remove the bottom door (see
Bottom door
on page
48
).
b.
Hard drive (see
Hard drive
on page
53
)
c.
Optical drive (see
Optical drive
on page
49
)
d.
Fan (see
Fan
on page
63
)
e.
Heat sink (see
Heat sink
on page
64
)
f.
Modem module (see
Modem module
on page
62
)
Component replacement procedures
93