HP ProBook 6465b HP ProBook 6465b Notebook PC - Maintenance and Service Guide - Page 99
Remove the system board from the chassis.
View all HP ProBook 6465b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
3. Remove the two Phillips PM2.5×4.5 screws (1) and the Phillips PM2.0×3.0 screw (1) that secures the system board to the base enclosure. 4. Lift the system board up at an angle (1), and then lift the system board up and out of the computer (2). 5. Remove the system board from the chassis. Reverse the preceding procedure to install the system board. Component replacement procedures 91
3.
Remove the two Phillips PM2.5×4.5 screws
(1)
and the Phillips PM2.0×3.0 screw
(1)
that
secures the system board to the base enclosure.
4.
Lift the system board up at an angle
(1)
, and then lift the system board up and out of the
computer
(2)
.
5.
Remove the system board from the chassis.
Reverse the preceding procedure to install the system board.
Component replacement procedures
91