HP ProBook 6465b HP ProBook 6465b Notebook PC - Maintenance and Service Guide - Page 89
RJ-11 connector cable
View all HP ProBook 6465b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
RJ-11 connector cable NOTE: The RJ-11 connector cable is included in the Cable Kit, spare part number 641830-001. Before removing the RJ-11 connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Remove the bottom door (see Bottom door on page 48). b. Hard drive (see Hard drive on page 53) c. Optical drive (see Optical drive on page 49) d. WLAN module (see WLAN module on page 59) e. WWAN module (see WWAN module on page 57) f. Modem module (see Modem module on page 62) g. Fan (see Fan on page 63) h. Heat sink (see Heat sink on page 64) i. Keyboard (see Keyboard on page 67) j. Bottom cover (see Bottom cover from top cover on page 70) Remove the RJ-11 connector cable: 1. Position the bottom cover with the front toward you. 2. Remove the RJ-11 connector (1) from the clip built into the base enclosure. Component replacement procedures 81