HP ProBook 6465b HP ProBook 6465b Notebook PC - Maintenance and Service Guide - Page 59

Upgrade bay, Position the computer upside-down with the right side toward you.

Get HP ProBook 6465b PDF manuals and user guides View all HP ProBook 6465b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Upgrade bay Description Upgrade Bay - Hard Drive Adapter Kit 500-GB, 7200-rpm hard drive Spare part number 643921-001 656424-001 Before removing a drive from the upgrade bay, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the bottom door (see Bottom door on page 48). Remove the drive from the upgrade bay: 1. Position the computer upside-down with the right side toward you. 2. Remove the four Phillips PM2.0×4.0 screws that secure the drive assembly into the upgrade bay. 3. Loosen the captive Phillips screw that secures the drive in the bay (1). 4. Push the drive tab (2) to release the drive from the computer. Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Upgrade bay
Description
Spare part number
Upgrade Bay – Hard Drive Adapter Kit
643921-001
500-GB, 7200-rpm hard drive
656424-001
Before removing a drive from the upgrade bay, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
41
).
5.
Remove the bottom door (see
Bottom door
on page
48
).
Remove the drive from the upgrade bay:
1.
Position the computer upside-down with the right side toward you.
2.
Remove the four Phillips PM2.0×4.0 screws that secure the drive assembly into the upgrade
bay.
3.
Loosen the captive Phillips screw that secures the drive in the bay
(1)
.
4.
Push the drive tab
(2)
to release the drive from the computer.
Component replacement procedures
51