HP ProBook 6465b HP ProBook 6465b Notebook PC - Maintenance and Service Guide - Page 68
protective sleeves must be installed on the antenna connectors, as shown in the following
View all HP ProBook 6465b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. 60 Chapter 4 Removal and replacement procedures
4.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
WLAN modules are designed with a notch
(4)
to prevent incorrect insertion.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the
protective sleeves must be installed on the antenna connectors, as shown in the following
illustration.
Reverse this procedure to install the WLAN module.
60
Chapter 4
Removal and replacement procedures