HP ProDesk 600 G4 Micro Maintenance and Service Guide - Page 42
Front bezel
View all HP ProDesk 600 G4 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Front bezel 1. Prepare the computer for disassembly (see Preparation for disassembly on page 30). 2. Remove the access panel (see Access panel on page 31). 3. Detach the three clips (1) on the top edge of the front bezel from the tabs on the computer chassis. 4. Swing the top edge of the front cover (2) away from the computer chassis. 5. Remove the front bezel. Reverse this procedure to install the front bezel. 34 Chapter 4 Removal and replacement procedures
Front bezel
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
30
).
2.
Remove the access panel (see
Access panel
on page
31
).
3.
Detach the three clips
(1)
on the top edge of the front bezel from the tabs on the computer chassis.
4.
Swing the top edge of the front cover
(2)
away from the computer chassis.
5.
Remove the front bezel.
Reverse this procedure to install the front bezel.
34
Chapter 4
Removal and replacement procedures