HP ProDesk 600 G4 Micro Maintenance and Service Guide - Page 48
Fan, Remove the fan
View all HP ProDesk 600 G4 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Fan Follow these steps to remove the speaker: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 30). 2. Remove the access panel (see Access panel on page 31). 3. Position the computer with the front panel toward you. 4. Disconnect the fan cable (1) from the system board. 5. Remove the three Phillips screws (2) that secure the fan to the computer chassis. 6. Remove the fan (3). Reverse this procedure to install the fan. 40 Chapter 4 Removal and replacement procedures
Fan
Follow these steps to remove the speaker:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
30
).
2.
Remove the access panel (see
Access panel
on page
31
).
3.
Position the computer with the front panel toward you.
4.
Disconnect the fan cable
(1)
from the system board.
5.
Remove the three Phillips screws
(2)
that secure the fan to the computer chassis.
6.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
40
Chapter 4
Removal and replacement procedures