HP ProLiant DL980 DL980 G7 User Installation Guide - Page 56
CAUTION, IMPORTANT, Remove the access panel
View all HP ProLiant DL980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all expansion slots have either an expansion slot cover or an expansion board installed. IMPORTANT: When either optional I/O expansion board in installed in a two-processor configuration, the second processor must be installed in socket 3. 1. Power down the server (on page 26). 2. Extend the server from the rack. 3. Remove the access panel (on page 27). 4. Release the latches on the release lever. 5. Lower the handle, and then extend the processor memory drawer from the server until the release latches catch. Hardware options installation 56
Hardware options installation 56
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all expansion slots have either an expansion slot cover or an expansion board
installed.
IMPORTANT:
When either optional I/O expansion board in installed in a two-processor
configuration, the second processor must be installed in socket 3.
1.
Power down the server (on page
26
).
2.
Extend the server from the rack.
3.
Remove the access panel (on page
27
).
4.
Release the latches on the release lever.
5.
Lower the handle, and then extend the processor memory drawer from the server until the release
latches catch.