HP ProLiant DL980 DL980 G7 User Installation Guide - Page 61
HP NC524SFP Dual Port 10GbE Module option
View all HP ProLiant DL980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4. To open the I/O card lock, push the blue tab, flip it back, then open the hinge forward. 5. Remove expansion slot covers as necessary. To replace the component, reverse the removal procedure. HP NC524SFP Dual Port 10GbE Module option When installed on the SPI board, the HP NC524SFP Dual Port 10GbE Module provides two 10G NIC connectors for server I/O. When the HP NC524SFP module is installed, 1G NIC connectors 1 and 2 on the rear panel are unavailable. IMPORTANT: When both an HP NC524SFP module and an optional HP NC522SFP Dual Port 10GbE Server Adapter are installed in the server, only two expansion slots have Wake On LAN capability. To install the component: 1. Power down the server (on page 26). 2. Disconnect the network cables. 3. Extend the server from the rack. 4. Remove the access panel (on page 27). 5. Remove the SPI board. Hardware options installation 61