HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 Maintenance and Serv - Page 40
Ambient temperature sensor cable
View all HP ProLiant MicroServer Gen8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
c. Release the cable from the left-side cable clip. d. Pull the module cable out through the top chassis opening. e. Pull the entire assembly out of the front USB module chassis opening. To replace the component, reverse the removal procedure. Ambient temperature sensor cable To remove the component: 1. Power down the server (on page 23). 2. Disconnect the power cord from the AC source. 3. Disconnect the power cord from the server. 4. Remove the front bezel (on page 25). 5. Remove the chassis cover (on page 26). Removal and replacement procedures 40
Removal and replacement procedures
40
c.
Release the cable from the left-side cable clip.
d.
Pull the module cable out through the top chassis opening.
e.
Pull the entire assembly out of the front USB module chassis opening.
To replace the component, reverse the removal procedure.
Ambient temperature sensor cable
To remove the component:
1.
Power down the server (on page
23
).
2.
Disconnect the power cord from the AC source.
3.
Disconnect the power cord from the server.
4.
Remove the front bezel (on page
25
).
5.
Remove the chassis cover (on page
26
).