HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 Maintenance and Serv - Page 44
cable is released from the chassis., Remove the non-hot-plug drive cage bracket
View all HP ProLiant MicroServer Gen8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
a. Disconnect the Mini-SAS cable from the system board or from a storage controller. b. Pull the Mini-SAS cable out from the left side chassis opening toward the right side one until the cable is released from the chassis. 10. Remove the non-hot-plug drive cage bracket: a. Remove the bracket screws. b. To release the bracket from the chassis tabs, pull it up and move it backward. Removal and replacement procedures 44
Removal and replacement procedures
44
a.
Disconnect the Mini-SAS cable from the system board or from a storage controller.
b.
Pull the Mini-SAS cable out from the left side chassis opening toward the right side one until the
cable is released from the chassis.
10.
Remove the non-hot-plug drive cage bracket:
a.
Remove the bracket screws.
b.
To release the bracket from the chassis tabs, pull it up and move it backward.