HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 Maintenance and Serv - Page 56
especially the contact area., Open the processor locking lever
View all HP ProLiant MicroServer Gen8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
To replace the system board: 1. Install the system board. CAUTION: Failure to completely open the processor locking lever prevents the processor from seating during installation, leading to hardware damage. CAUTION: To avoid damage to the processor, do not touch the bottom of the processor, especially the contact area. 2. Open the processor locking lever, and then open the processor retaining bracket. Removal and replacement procedures 56
Removal and replacement procedures
56
To replace the system board:
1.
Install the system board.
CAUTION:
Failure to completely open the processor locking lever prevents the processor from
seating during installation, leading to hardware damage.
CAUTION:
To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
2.
Open the processor locking lever, and then open the processor retaining bracket.