HP ProLiant MicroServer Gen8 HP ProLiant MicroServer Gen8 Maintenance and Serv - Page 55
Remove all DIMMs, Removing a DIMM, Expansion board
View all HP ProLiant MicroServer Gen8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
8. Grasp the processor by the edges, and then lift it out of the socket. 9. Remove all DIMMs ("Removing a DIMM" on page 49). 10. If installed, remove the expansion board ("Expansion board" on page 47). 11. Remove the failed system board. Removal and replacement procedures 55
Removal and replacement procedures
55
8.
Grasp the processor by the edges, and then lift it out of the socket.
9.
Remove all DIMMs ("
Removing a DIMM
" on page
49
).
10.
If installed, remove the expansion board ("
Expansion board
" on page
47
).
11.
Remove the failed system board.