HP ProLiant WS460c HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graph - Page 28
Remove the workstation blade, Access panel
View all HP ProLiant WS460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
b. On the Virtual Power menu, to initiate a controlled shutdown of applications and the OS, select Momentary Press, or to initiate an emergency shutdown of applications and the OS, select Press and Hold. Remove the workstation blade To remove the component: 1. Identify the proper workstation blade. 2. Power down the workstation blade (on page 26). 3. Remove the workstation blade. 4. Place the workstation blade on a flat, level work surface. WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: To prevent damage to electrical components, properly ground the workstation blade before beginning any installation procedure. Improper grounding can cause ESD. Access panel To remove the component: 1. Power down the workstation blade (on page 26). 2. Remove the workstation blade (on page 28). 3. If necessary, remove the graphics expansion blade ("WS460c Graphics Expansion Blade" on page 29). 4. Press the access panel release button. 5. To remove the access panel, slide it towards the rear of the workstation blade, and then lift the panel. To replace the component: 1. Place the access panel on top of the workstation blade. Removal and replacement procedures 28