HP ProLiant WS460c HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graph - Page 74
Remove the FlexibleLOM, Remove all DIMMs
View all HP ProLiant WS460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
CAUTION: When returning a damaged system board to HP, always install all processor socket covers to prevent damage to the processor sockets and system board. To remove the component: 1. Power down the workstation blade (on page 26). 2. Remove the workstation blade (on page 28). 3. Remove the access panel ("Access panel" on page 28). 4. Remove all hard drives ("Drive" on page 41). 5. Remove all hard drive blanks ("Drive blank" on page 41). 6. Remove the front panel/drive cage assembly ("Front panel/drive cage assembly" on page 66). 7. Disconnect the capacitor pack cabling, if connected ("FBWC capacitor pack cabling" on page 97). 8. Remove the SAS controller ("SAS controller" on page 54). 9. Remove all DIMM baffles ("DIMM baffles" on page 43). 10. Remove all DIMMs ("DIMMs" on page 44). 11. Remove the FlexibleLOM ("FlexibleLOM" on page 52). 12. Remove the heatsink ("Heatsink" on page 68). 13. Open each of the processor locking levers in the order indicated, and then open the processor retaining bracket. Removal and replacement procedures 74