HP ProLiant WS460c HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graph - Page 38
NVIDIA GRID K1 and GRID K2 I/O Plate
View all HP ProLiant WS460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
NVIDIA GRID K1 and GRID K2 I/O Plate Required tools for this procedure: • NVIDIA GRID K1 I/O plate or NVIDIA GRID K2 I/O plate • M2.5x6 mm flat head screws (2) To remove the graphics cards from the graphics expansion blade and install the plate: 1. Power down the workstation blade (on page 26). 2. Remove the workstation blade (on page 28). 3. Remove the screws and washers. IMPORTANT: Remove the I/O plate from the original NVIDIA GRID K2 card. Before installing the NVIDIA GRID K2 I/O plate on the graphics expansion blade, the GRID K2 card I/O plate must be assembled with the new spare part. IMPORTANT: For NVIDIA GRID K1 installation: Remove the pre-installed I/O plate from the NVIDIA GRID K1 card and replace it with the I/O plate from the original NVIDIA GRID K1 card. Removal and replacement procedures 38