HP ProLiant WS460c HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graph - Page 42
Enclosure connector cover
View all HP ProLiant WS460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. Remove the drive. To replace the component: CAUTION: To prevent improper cooling and thermal damage, do not operate the workstation blade or the enclosure unless all drive and device bays are populated with either a component or a blank. 1. Prepare the drive. 2. Install the drive. 3. Determine the status of the drive from the drive LED definitions ("Hot-plug drive LED definitions" on page 91). Enclosure connector cover To remove the component: 1. Place the workstation blade on a flat, level work surface. Removal and replacement procedures 42
Removal and replacement procedures
42
3.
Remove the drive.
To replace the component:
CAUTION:
To prevent improper cooling and thermal damage, do not operate the workstation
blade or the enclosure unless all drive and device bays are populated with either a component or
a blank.
1.
Prepare the drive.
2.
Install the drive.
3.
Determine the status of the drive from the drive LED definitions ("
Hot-plug drive LED definitions
" on page
91
).
Enclosure connector cover
To remove the component:
1.
Place the workstation blade on a flat, level work surface.