HP ProLiant WS460c HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graph - Page 93
System maintenance switch, Mezzanine connector definitions, DIMM slot locations, Position, Default
View all HP ProLiant WS460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
System maintenance switch Position S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 Default Off Off Off Off Off Off - - - - - - Function Off = HP iLO security is enabled. On = HP iLO security is disabled. Off = System configuration can be changed. On = System configuration is locked. Reserved Reserved Off = Power-on password is enabled. On = Power-on password is disabled. Off = No function On = ROM reads system configuration as invalid. Reserved Reserved Reserved Reserved Reserved Reserved To access the redundant ROM, set S1, S5, and S6 to on. For the graphics expansion blade, make sure that S9 is in the ON position. When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all system configuration settings from both CMOS and NVRAM. CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly configure the server or data loss could occur. Mezzanine connector definitions Item PCIe Mezzanine connector 1 x16, Type A mezzanine card only Mezzanine connector 2* x16, Type A or B mezzanine card *When installing a mezzanine option on mezzanine connector 2, processor 2 must be installed. DIMM slot locations DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the alpha assignments for population order, and the slot numbers designate the DIMM slot ID for spare replacement. Component identification 93