HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 29
Volume button board, Remove the power button board
View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Remove the power button board: 1. Remove the rubber pad (1) that protects the power button board cable ZIF connector. 2. Release the ZIF connector (2) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 3. Detach the power button board (3) from the display panel assembly. (The power button board is attached to the display panel assembly with double-sided adhesive.) 4. Remove the power button board and cable. Reverse this procedure to install the power button board and cable. Volume button board Description Volume button board (includes cable, double-sided adhesive, and rubber pad) Spare part number 744541-001 Before removing the volume button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. HP Slate10 HD 23