HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 53
Power button/microphone module, Remove the antenna modules
View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Remove the antenna modules: 1. Remove the three Phillips PM2.0×2.75 screws (1) that secure the antenna modules to the display panel assembly. 2. Detach the 3G antenna module (2) from the display panel assembly. (The 3G antenna module is attached to the display panel assembly with double-sided adhesive.) 3. Detach the WiFi antenna module (3) from the display panel assembly. (The WiFi antenna module is attached to the display panel assembly with double-sided adhesive.) 4. Remove the antenna modules. Reverse this procedure to install the antenna modules. Power button/microphone module Description Power button/microphone module (includes cable, double-sided adhesive, and rubber pad) Spare part number 744580-001 Before removing the power button/microphone module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. HP Slate7 HD 47