HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 40
Remove the three Phillips PM2.0×2.75 screws
View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Disconnect the following cables from the system board: (1) Microphone ZIF connector and cable (2) Rear-facing webcamera cable (3) Card reader board ZIF connector and cable (4) Right speaker cable 3. Remove the three Phillips PM2.0×2.75 screws (1) and the three Phillips PM2.0×2.0 broad head screws (2) that secure the system board to the display panel assembly. 34 Chapter 5 Removal and replacement procedures
2.
Disconnect the following cables from the system board:
(1)
Microphone ZIF connector and cable
(2)
Rear-facing webcamera cable
(3)
Card reader board ZIF connector and cable
(4)
Right speaker cable
3.
Remove the three Phillips PM2.0×2.75 screws
(1)
and the three Phillips PM2.0×2.0 broad head
screws
(2)
that secure the system board to the display panel assembly.
34
Chapter 5
Removal and replacement procedures