HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 56

Release the front-facing webcamera from the retention molding built into the 3G antenna module.

Page 56 highlights

3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 37), and then remove the following components: a. Battery (see Battery on page 38) b. System board (see System board on page 43) c. 3G antenna module (see Antenna modules on page 46) Remove the front-facing webcamera: 1. Turn the 3G antenna module upside down with the bottom toward you. 2. Release the front-facing webcamera from the retention molding built into the 3G antenna module. 3. Remove the front-facing webcamera and cable. Reverse this procedure to install the front-facing webcamera. 50 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
37
), and then remove the following components:
a.
Battery (see
Battery
on page
38
)
b.
System board (see
System board
on page
43
)
c.
3G antenna module (see
Antenna modules
on page
46
)
Remove the front-facing webcamera:
1.
Turn the 3G antenna module upside down with the bottom toward you.
2.
Release the front-facing webcamera from the retention molding built into the 3G antenna module.
3.
Remove the front-facing webcamera and cable.
Reverse this procedure to install the front-facing webcamera.
50
Chapter 5
Removal and replacement procedures