HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 32

Rear-facing webcamera, Detach the rear-facing webcamera

Page 32 highlights

Rear-facing webcamera Description Rear-facing webcamera (includes cable) Spare part number 744545-001 Before removing the rear-facing webcamera, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 18). 5. Disconnect the battery cable from the system board (see Battery on page 20). Remove the rear-facing webcamera: 1. Disconnect the rear-facing webcamera cable (1) from the system board. 2. Detach the rear-facing webcamera (2) from the display panel assembly. (The rear-facing webcamera is attached to the display panel assembly with double-sided adhesive.) 3. Remove the rear-facing webcamera and cable. Reverse this procedure to install the rear-facing webcamera. 26 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

Rear-facing webcamera
Description
Spare part number
Rear-facing webcamera (includes cable)
744545-001
Before removing the rear-facing webcamera, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
18
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
20
).
Remove the rear-facing webcamera:
1.
Disconnect the rear-facing webcamera cable
(1)
from the system board.
2.
Detach the rear-facing webcamera
(2)
from the display panel assembly. (The rear-facing
webcamera is attached to the display panel assembly with double-sided adhesive.)
3.
Remove the rear-facing webcamera and cable.
Reverse this procedure to install the rear-facing webcamera.
26
Chapter 5
Removal and replacement procedures