HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 47

from the battery. The TouchScreen module cable is, Detach the TouchScreen module cable

Get HP Slate 10 HD 3500ca PDF manuals and user guides View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

4. Remove the back cover (see Back cover on page 37). 5. Disconnect the battery cable from the system board (see Battery on page 38). Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the ZIF connector (2) to which the TouchScreen module cable is attached, and then disconnect the TouchScreen module cable from the system board. 3. Detach the TouchScreen module cable (3) from the battery. (The TouchScreen module cable is attached to the battery with double-sided adhesive.) 4. Remove the four Phillips PM2.0×2.75 screws (4) that secure the speakers to the display panel assembly. 5. Remove the speakers (5). Reverse this procedure to install the speakers. HP Slate7 HD 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
4.
Remove the back cover (see
Back cover
on page
37
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
38
).
Remove the speakers:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Release the ZIF connector
(2)
to which the TouchScreen module cable is attached, and then
disconnect the TouchScreen module cable from the system board.
3.
Detach the TouchScreen module cable
(3)
from the battery. (The TouchScreen module cable is
attached to the battery with double-sided adhesive.)
4.
Remove the four Phillips PM2.0×2.75 screws
(4)
that secure the speakers to the
display panel assembly.
5.
Remove the speakers
(5)
.
Reverse this procedure to install the speakers.
HP Slate7 HD
41