HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 42
Remove the front-facing webcamera, Reverse this procedure to install the front-facing webcamera.
View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Remove the front-facing webcamera: 1. Turn the system board upside down, with the bottom edge toward you. 2. Release the ZIF connector (1) to which the front-facing webcamera cable is attached, and then disconnect the front-facing webcamera cable from the system board. 3. Remove the front-facing webcamera (2) and cable. Reverse this procedure to install the front-facing webcamera. 36 Chapter 5 Removal and replacement procedures
Remove the front-facing webcamera:
1.
Turn the system board upside down, with the bottom edge toward you.
2.
Release the ZIF connector
(1)
to which the front-facing webcamera cable is attached, and then
disconnect the front-facing webcamera cable from the system board.
3.
Remove the front-facing webcamera
(2)
and cable.
Reverse this procedure to install the front-facing webcamera.
36
Chapter 5
Removal and replacement procedures