HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 36

USB board, Disconnect the power from the tablet by unplugging the power cord from the tablet.

Get HP Slate 10 HD 3500ca PDF manuals and user guides View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

3. Remove the four Phillips PM2.0×2.75 screws (3) that secure the speakers to the display panel assembly. 4. Remove the speakers (4). Reverse this procedure to install the speakers. USB board Description USB board (includes bracket, cable, micro USB port, and rubber pad) Spare part number 744536-001 Before removing the USB board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 18). 5. Disconnect the battery cable from the system board (see Battery on page 20). 30 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
3.
Remove the four Phillips PM2.0×2.75 screws
(3)
that secure the speakers to the
display panel assembly.
4.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
USB board
Description
Spare part number
USB board (includes bracket, cable, micro USB port, and rubber pad)
744536-001
Before removing the USB board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
18
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
20
).
30
Chapter 5
Removal and replacement procedures